You may view the attached photos to assemble your HootBooth Illumin8 Unit:


  1. Use the two provided thumb screws to secure the Pedestal to the Base Piece
  2. Slide the Illumin8 Top unit onto the mount at the top of the Pedestal
    1. Plug in two wires: 1 for the Ring Light power and one for the iPad power
  3. Coming out of the bottom of the Pedestal are the Ring Light power cable and the iPad power cable. These should be plugged into a power strip as shown. 
  4. Insert your 9.7" iPad into the Top unit and secure using the provided key.